-
Hi,
I had the same problem and the solution was to update the drivers of the graphic card.
Bests
Christian
-
Hi,
does anybody has problems to connect the Internet license ??
I can't get a connection to the relay server. But I have no idea, what I should do now.
The adress is physically available and can be reached with other software.
Does anyone has an idea ?
I use MIKE License administrator 2021 and FEFLOW 7.4 Upd 1.
Bests
Christian
-
Dear Sashen,
looks like an error.
I think, this should be addressed to the MIKE support.
Bests
-
Hi Mariza,
which post do you mean exactly ?
Would be better to adress specific posts instead of blaming everyone.
Bests
Christian
-
Hi Rahul,
I assume the reason is, that the item type is set to UNDEFINED.
Try to define it as Surface elevation.
Bests
Christian
-
Hi,
unfortunately I am not allowed to share this routine for free
We have developed it on our own budget.
You can send us an e-Mail: info@spekter.de
Bests
Christian
-
Hi.
you can try to add a small deeper basin "beyond" the boundary and assign the boundary condition there.
In most of the cases, this helps to stable the boundary condition.
Bests
Christian
-
Hi,
I think F2 should do the job.
Bests
Christian
-
Hi,
the transfer rate is clearly defined in the FEFLOW documentation.
It is related to a virtual clogging layer in a river.
http://www.feflow.info/html/help72/feflow/09_Parameters/Boundary_Conditions/Flow/fluid_transfer_bc.html
The definition of the Transfer Rate can be found here:
http://www.feflow.info/html/help72/feflow/09_Parameters/Material_Properties/flow_parameters.html
in the section: Transfer Rate (Fluid)
Bests Christian
-
ok. got it for myself.
the second parameter is simply the node number.
But nevertheless, i am not sure, how this is to be interpreted in Python:
IfmBudgetComponents *pBudgetComp
Opaque pointer of budget flux components.
to retrieve other components than the boundary condition related flux.
Bests
Christian