Dipen Saha Graduate Research Assistant

When I simulate 2D model by MIKE 21 FM simulation tracking info (i.e. remaining time, percent completion, time step etc) are missing. These are blank. How to make them on?

There is an option of including line structure in MIKE 21 SW but I didn't see any width information of breakwater to be incorporated. How to deal with the width of line structure in MIKE 21 SW? Please let me know if anyone has insight regarding this matter. 

in shape file how to numbering the zone? Lets Say I have water body shapefile polygon. how will I make the zoning at attribute table?

Hello there! In my 2D hydraulic model domain I want to incorporate wetlands. One way is to include them by meshing and DEM. But for a large domain and unevenly distributed wetlands. Its very difficult to incorporate. Do you know any other ways to consider wetlands for 2D HD model? Please lets discuss here. The wetlands are marked as green in the attached figure.

Thank you so much

coupling mesh delineation is disabled. For execution of mesh delineation, include environmental variable called 'UseCouplingDelineation'

During cyclonic wind generation, a domain is to provided there which is essentially a dfs2 file. For my domain (lets say for bathymetry) how can I create dfs2 file for my bathymetry? My domain is either mesh or dfsu file which can not be converted by MIKE tool but dfs2 to dfsu conversion tool is there. Any help in this regard?

I already sent it. As right now I am using students lab kit so I am not supposed to get technical support. That is why I posted it here. 

I am facing following problem while simulating 1D river model in MIKE +. How can I change the default value 1 to 100 times to overcome this error in MIKE+? Largest exceedance on reach 'GAUDALUPE_RV', chainage: 3400.00 m. Water depth is 1.3650 m which is more than 1.0000 times the cross section height. Water level is 1.8450 m.

I am developing a 2D hydrodynamic model for coastal inundation. I used MIKE 21 FM flow model for that where I used spherical coordinate system (Lat-Long). I want to add upstream rivers and want to do 1D model and coupling with 2D model. Is it possible to do MIKE 1D by Mike+ having spherical coordinate system?