Ludwig Ehlert

Hi Ron,

to change the coordinate system you need to do the following steps. Open ArcCatalog and search your .mdb file in the directory. Tha you double click on it and a list of features and tables will appear. Right click on mu_Geometry, and choose Properties. In the second tab of the properties dialog you can choose your coordinate system and enable the new choice with pressing apply. Saving of the .mdb won't be necessary.

Good luck

//Ludwig

Dear ronbrocoe,

you should be able to change the projection of your project with ArcGIS (ArcMap or ArcCatalog). Simply close the project in MIKE URBAN and open it in GIS. When opening the next time in MIKE URBAN it should work with the new projection.

//Ludwig

Hi bendelBoy,

the .trf file can be viewed with the Freeware MIKE VIEW. However, you will need to have a .PRF file and than you can view the .trf file via File/Add../Add result file into project? -> Yes

//Ludwig

Dear Eytan,

to receive the SP 5 for MU 2009 please contact us via mikebydhi.de@dhigroup.com.

Best regards

Ludwig

Hi Lemiss,

in Mike Urban you need to use the Import/Export. The table where the catchment informations are stored is ms_catchments. For the import you find detailed explanations in the manual "Model-Manager" chapter 7.

Good Luck
Ludwig