Elin

Hi!

I’m a student that is working with Mike SHE and Mike 11 and is having a problem with AutoCal. When I try to auto calibrate the model, the Autocal runs 51 times before stopping at 9 % of the simulation. I get one simulation that is OK, the other fails. I don’t know how to solve the problem so that AutoCal can make more successful runs. I’ve tried to reduce the number of parameters and observations measurements to calibrate against, but to no result.  The model that I try to calibrate does terminate successfully. Do you know what else I can try, or what might be wrong? Also, what are the main factors controlling the simulation time of AutoCal?

Thank you!

Best regards
Elin



AutoCal message:

Evaluation of parameter set No. 48 initiated
Evaluation of parameter set No. 46 completed: FAILED - model run error
Evaluation of parameter set No. 49 initiated
Evaluation of parameter set No. 47 completed: FAILED - model run error
Evaluation of parameter set No. 50 initiated
Evaluation of parameter set No. 48 completed: FAILED - model run error
Evaluation of parameter set No. 49 completed: FAILED - model run error
Evaluation of parameter set No. 50 completed: FAILED - model run error
Evaluation of parameter set No. 4 completed: OK

Thank you for the help! That solved my problem! :)

Hi! I've been working with a integrated model for MIKE SHE, where I try to combine the SZ and UZ. I have unfortunately had a bit of trouble because my model stops at 7.8% each time (preprocessing is always successful). Unfortunately, I do not really know how to solve the problem. The message I get is:

ERROR: Groundwater below UZ column in point ( 46 140)
depth to groundwater: 19.75 m (level 273.84 m)
max depth of column : 19.75 m (soil profile no. 1)
nrpd,m1,lbot,accprdepth(lbot,m1), accprdepth(lbot+1,m1):
0        1            1            19.75000000000 
19.75000000000

I'm a student and is rather new at working with MIKE SHE and appreciate all the help I can get!

Thank you so much in advance!

Best regards

Elin