shai Asher CAMERI

Hi,<br> <br> <br> I encountered some oddity in mzWriteMesh.m. Say I open a mesh with some local project and alter the node values. Then, I save the altered mesh, and the projected coordinates are fine, but the underlying geographical coordinates are wrong, which is to say, the projection is wrong.&nbsp;<br> perhaps I'm writing the wrong entry in the "coordinate system" in the function?.<br> <br> any thoughts would be appreciated.&nbsp;<br> Shai<br> &nbsp; <grammarly-desktop-integration data-grammarly-shadow-root="true"></grammarly-desktop-integration>

Hi,<br> <br> I have a question about output items.&nbsp;<br> How do I calculate bottom level change from bottom level values?<br> I want to make sure the calculation is right.&nbsp;<br> <br> Thanks,<br> Shai <grammarly-desktop-integration data-grammarly-shadow-root="true"></grammarly-desktop-integration>

Hi,<br> <br> I'm trying to run a near-shore 2d simulation (HD+SW) with wind forcing (applied only to the HD part).&nbsp;<br> The issue i'm facing is that whatever boundary conds I set, the simulation blows up (except for flather, but those give me unreliable results).&nbsp;<br> <br> any thoughts on how to stabilize the simulation would be appreciated,<br> <br> Cheers,<br> Shai <grammarly-desktop-integration data-grammarly-shadow-root="true"></grammarly-desktop-integration>

Hi,<br> <br> I was wondering what is DHI's recommendation regarding the use of curvilinear grids in the SM module (at least far enough away from regions with diverging flow).&nbsp;<br> <br> any thoughts?,<br> Shai&nbsp; <grammarly-desktop-integration data-grammarly-shadow-root="true"></grammarly-desktop-integration>

Hi,<br> <br> Where can I find the criterion by which MIKE21/3&nbsp; HD and SW switch between spherical and cartesian coordinates solver formulations?&nbsp;<br> <br> Thanks,<br> Shai <grammarly-desktop-integration data-grammarly-shadow-root="true"></grammarly-desktop-integration>

Hi,

I'm running a large-scale wave transformation simulation using ECMWF data and I noticed something peculiar in my output results (time series at some point near the shore). The peak-wave-direction changes overtime in what seem to be discontinuous steps, whereas the mean-wave-direction changes smoothly over time, as it well should. 

Any idea on what may control this difference?

cheers,
Shai

 

Hi,

How would I impose a solid boundary beyond which the shoreline cannot retreat ? 

any thoughts would help,
Thanks,
Shai