Please wait...
×

Error

Posted Thu, 12 Sep 2013 08:20:26 GMT by Ki-hoon Kim
We use FEFLOW 6.0 FH3 with BHE modules and TRNSYS (http://en.wikipedia.org/wiki/TRNSYS).

When we run FEFLOW, we've got following warning message.
"Warning: Setting final time according with TRNSYS to 213.958 difference to original value is 235.433"
Warning Image (http://setup.partswox.com/Warning.png)

We are setting on FEFLOW like as following images.
TRNSYS Settings Image (http://setup.partswox.com/TRNSYS.png)
Problem Settings Image (http://setup.partswox.com/ProblemSettings.png)

we did not enter original value (235.433).
Where can i find "original value"?

Thank you.
Posted Thu, 12 Sep 2013 09:02:43 GMT by Denim Umeshkumar Anajwala
The warning wants to say (maybe not very clear indeed) that the final time in TRNSYS has been set to an earlier time than the final time of the FEFLOW model. Thus the plug-in resets the final simulation time in the FEFLOW Problem Settings to the final time derived from the TRNSYS data. After this, the 'original value' is no longer visible.

You must be signed in to post in this forum.