Please wait...
×

Error

Posted Wed, 24 Nov 2010 12:22:50 GMT by Roby
Hi, i'm running a large 3d model on a quadcore, but unfortunately it use only 25% of total cpu power.
Are there any setting or tricks that we need to do for run the at full power.

Feflow is set to run with all the cpu. My computer have 2 dual core AMD Opteron processor 2212 2.01 gh, with 16 gb ram, 64 bit.

Posted Wed, 24 Nov 2010 15:52:30 GMT by Denim Umeshkumar Anajwala
FEFLOW does not use parallelization for all tasks to be done during a simulation run. Using the standard PCG-type solvers, for example, the equation system will be solved only on one processor/core. The alternative algebraic multigrid solver (SAMG) uses all available processors and solves the system in parallel.
Posted Thu, 25 Nov 2010 08:30:44 GMT by Roby
Thanks for the solution. I have another little question:
is possible to run feflow on multiple machine(something like distribuited computing)? We haven't a faster pc and the simulation take a lot of time.
Posted Mon, 29 Nov 2010 06:37:54 GMT by Denim Umeshkumar Anajwala
Currently this is not possible - unfortunately.
Posted Tue, 07 Dec 2010 09:12:29 GMT by Hugo Janse van Rensburg Dr.
Hi Peter

I am running Windows 7 64 bit with an Intel I7-950 -1366 processor with 8Gb of Ram. I get extremely slow performance. Any suggestions? I noticed the refreshing on the graphics is also extremely slow.

You must be signed in to post in this forum.