Dongle installation problem!

hello all...
i'm not sure if this is right place for this topic, but i have serious problems installing feflow dongle licence under Fedora Core 5.
somehow i installed feflow successfully and it runs fine under DEMO licence, but dongle cannot be found although i opened port 1800.(HOSTID can't be recognised, LED on dongle constantly lights red)
is there some particular procedure for installing hardware licence under linux os?
i have installed FEFLOW5.3 ...
as far as i know this dongle works fine only on one windows machine (not sure what version of windows it is).
coworkers of mine said that there was also problem installing this dongle on other windows machines.

i'm pretty new with FEFLOW and any help is welcome.

thanks in advance.

Peter

Dear Peter,

in the following is a short description of how to install a dongle on a Linux system.
If the installation-problem persists please contact [email]support@dhi-wasy.de[/email].

As an important  prerequisite the USB file system (usbfs) has to be mounted!
e.g. by
$mount –t usbfs none /proc/bus/usb/
Possibly the dongle demon has to be started (again) afterwards manually by:
/etc/init.d/aksusbd restart
For continuous operation it is necessary to modify /etc/init.d/boot.local the entry for the usbfs with "mount -a"  to assure that the usbfs from fstab is mounted automatically.
The dongle drivers are available from:  [url=http://www.feflow.info/download/FEFLOW/linux/hasp/]http://www.feflow.info/download/FEFLOW/linux/hasp/ [/url]
See also [url=http://www.pdesolutions.com/discus/messages/4/1661.html?1148534142]http://www.pdesolutions.com/discus/messages/4/1661.html?1148534142[/url]

HTH
Kind regards
Wolfram