Please wait...
×

Error

Posted Thu, 25 Apr 2024 09:25:34 GMT by Timotej Misic
Hallo, I am running MIKE21/MIKE11 simulation on rivers (MIKE21 recatangular grid) and simulation stops with message: "FlushFile: Unable to flush file Abnormal completion" It stops in the moment, when it should write the od M21 result file to disk (dfs2 - H,P,Q and Surface elevation items). First 5 steps were written withouut problems. I should mention that: - there is enough space on HDD, - the RAM memoriy is more then 50% free (>16 GB), - that I was running 4 different simulations simultaneously. I have read this thread (https://support.dhigroup.com/forums/mike21/7c14fd17-13e3-ec11-bb3c-000d3ab6f50d) but I would like to point out, that this issue never happened before altough we were often running 4 simulations simultaneously. Does anyone has any clue what could have caused the problem? Thanks in advance Timotej
Posted Wed, 08 May 2024 11:37:18 GMT by Denim Umeshkumar Anajwala
Thank you for your post. Since this seems to be a support enquiry we suggest that you contact our support team at MIKE@dhigroup.com and we will be happy to follow up on this matter. Best Regards. DHI Admin
Posted Wed, 08 May 2024 12:19:12 GMT by Timotej Misic
Hallo, thank for the answer. My suspicion is the length of the path for the result file of MIKE21 (dfs2). If we do not solve the problem, I wil contact the support. Best Regards Timotej

You must be signed in to post in this forum.