Please wait...
×

Error

Posted Wed, 24 Apr 2013 13:44:45 GMT by Thomas O.
Hi,
with the option "use parameter expression" to control in/outflow on top/bottom so it is dependent on the simulated pressure, how can I visualize the values assigned to the model at each time step in a transient simulation?
If I double click  in/outflow on top/bottom in the data panel of the DAC file, I only see the previously assigned  "use parameter value".
Anyone had this problem before or knows how I can see the transient  in/outflow on top/bottom values&
Regards,
Thomas
Posted Fri, 26 Apr 2013 01:38:42 GMT by Blair Thornburrow Groundwater Modeller
Here is a workaround for visualising the results of a formula quickly:

1. Create a nodal reference distribution
2. Assign values to the reference distribution using the formula input
3. Copy the formula from in/outflow and manually substitute time series values where necessary

Otherwise your only option is to save a DAC file of the transient simulation and visualise the boundary fluxes at slice 1 nodes.  The issue with this is that values are volumetric flows, rather than a velocity.
Posted Tue, 30 Apr 2013 18:44:34 GMT by Thomas O.
Hey Blair!
thanks so much!
It worked.
(I used an elemental distribution as it is an elemental property, but it all worked thanks to your explanations).
Best regards,
Thomas

You must be signed in to post in this forum.