Transient

Hello,

I would like to know method to put transient values for "in/out flow on top/bottom" on feflow 5.3.
As i understand it is not possible on the 6.0.

Regards,

Terry

Hello Terry,

Transient values for material parameters can be set in the classic interface only. You can use 6.0 but need to switch to the classic interface. Here is a video showing the assignment of time varying material: [url=http://www.feflow.info/318.html]http://www.feflow.info/318.html[/url]

Thank you Bastian,

The best answer ever !!

In my case, i have only one transient values area (IN/OUT flow on top/bottom).
On feflow 5.3, I use "[b]Assign[/b]" mode "[b]database[/b]" to put a "[b]trp[/b]" and a "[b]pow [/b]"file.
But it seems not working. Maybe the files syntax are wrong...

Pow file syntax:

[b]IN/OUT flow
!
1 40.79092166
2 40.79092166
3 40.79092166
4 40.79092166
5 40.79092166
6 40.79092166
7 40.79092166
8 40.79092166
9 40.79092166
10 40.79092166
11 4.51337741
12 4.51337741
13 4.51337741
14 4.51337741
15 4.51337741
16 4.51337741
17 4.51337741
18 4.51337741
19 4.51337741
20 4.51337741
21 47.79894295
22 47.79894295
23 47.79894295
24 47.79894295
25 47.79894295
26 47.79894295
27 47.79894295
28 47.79894295
29 47.79894295
30 47.79894295
31 47.79894295
32 13.10782408
...
END
END
[/b]


trp file syntax:
[b]
338833 7692977 1
337962 7678601 1
367314 7692705 1
368022 7678873 1
END[/b]



I think there is a mistake in the first two lines of pow file. And i'm not sur that "numzone column" for trp file is exact. Then, trp file need information (first two lines) like pow file ???