Dear users,
I've imposed, in my model (using Feflow 6.0), a time-varying (daily based) recharge. The power function has been set as constant.
The ASCII .fem file indicates that the recharge is calculated, for every day, as the average of the value I've imposed at the day and the value imposed at the day before. This is not done only if the value at the day before was zero: in this case, the exact value is input in the .fem (see the example below)
MY SET - FEFLOW FEM
1 -> 1
4 -> 2.5
0 -> 2
3 -> 3
2 -> 2.5
Is it a bug or just a procedure that doesn't effect (as it would seem) the total inflow?
Thank you
Angelo
