-
Re: HD error
Thank you so much Tor,
That problem is solved. Now i would like to couple lateral inflow from MIKESHE to MIKE11 instead of just running a stand-alone AD simulation. What i did is to active `LATERAL_INFLOW_FROM_RESULT_FILE' in the MIKE11.ini file by swetiching from OFF to ON. Next i specify the normal .res11 type rather than HD.res11 from a previous run in the HD result file. The WQ file is then run under MIKESHE with AD module selected.
Do you think what i did is correct?
Thanks again!
-
HD error
Hi,
I am running the water quality model in MIKESHE and i have encountered an error called: MIKE11 can not read HD result file.
When AD & HD simulation were performed in MIKE11itself, it succeed. However, when i coupled MIKE11 to MIKESHE with the AD water quality module selceted, the error occurred . Is there anyone knows how to solve the problem?
-
wrong time interval
I have encountered an error: wrong time interval. starting time begin 8985609.00 should be smaller than the ending time 8985606.7. it occured when i combined the MIKE11 to MIKESHE and i think the main problem is about MIKE11. Any suggestions?